Step 1: Gather a rounded-handle hairbrush, thick sponge, duct tape, a condom and scissors.
Step 2: Trace the top half of the hairbrush onto the sponge using a marker.
Step 3: Cut the traced area out with scissors.
Step 4: Cut a line in the center of the sponge piece about 3/4 of the way up.
Step 5: Open the piece of sponge and cover the end of the brush handle to create a more rounded tip.
Step 6: Secure the sponge piece to the brush handle using duct tape.
Step 7: Cover the handle of the hairbrush with a condom. Be sure and hold on to the opening of the condom when using the hairbrush as an anal sex toy.
Step 1: Gather the accordion-style plunger, sand paper and a condom.
Step 2: Use sand paper to smooth out any seams that could scratch or puncture the condom.
Step 3: Cover the handle of the plunger with a condom.
This can be used as an aweseom prostate massager with it’s bulbeous head.
Drain plungers are smaller cousins to toilet plungers. They have a strong suction base with a shorter, wooden handle. And, if you happen to have one around the house, with a few safety tweaks, you can make a DIY, hands-free anal toy you can stick to the floor, wall or piece of furniture. Here is how to make it:
Step 1: Cut a slit on the bottom of a large, thick sponge using a sharp kitchen knife. Be careful!
Step 2: Work the knife into the sponge cutting 3/4 of the way up. Twist the knife carefully to form a small hole.
Step 3: Slide the sponge over the plunger handle, leaving a couple of inches on top to cushion the tip.
Step 4: Using scissors, trim the excess sponge from around the handle, leaving 1.5″ to 2″ on each side for cushioning.
Step 5: Secure the bottom of the sponge to the plunger handle using strong, duct tape.
Step 6: Place a condom at the tip of the plunger handle and roll it down to cover the entire sponge. Now you can use the sink plunger as a hands-free, anal sex toy.
 |
 |
